Wednesday 14 November 2012
How To Hide & UNHIDE Hard disk Volumes By CMD Command
How To Hide and unhide the hard disk Volumes using CMD Commands :
First check how many drives are there in my computer and then see which drive holds your secret files.Then make the drive to invisible by following the below steps of using cmd commands,
start->run->cmd->DISKPART
DISKPART>list volume (it list available partition volumes)
select the volume by SELECT VOLUME 1or 2 ..
Hide the selected volume by REMOVE LETTER C or D or... command.
Note :For Unhide the hidden drive use the command ASSIGN LETTER after selecting the hidden drive.
Now to unhide the partition:
Go to an elevated command prompt=run cmd.exe as administrator
Enter following commands:
DISKPART --- run the diskpart program
LIST DISK ---- list the disks in system
SELECT DISK n ----n is number of disk with hidden volume
DETAIL DISK ----- to make sure you got the right one
LIST VOLUME ------lists the volumes in the system
SELECT VOLUME n ----n is the number of the hidden volume
DETAIL VOLUME ---- to make sure you got the right one
ATTRIBUTES VOLUME CLEAR HIDDEN ---clear the hidden attribute
EXIT --- exit from DiskPart
EXIT --- exit from command shell
Later if you want to hide the volume again then the command is:
ATTRIBUTES VOLUME SET HIDDEN
This is another posting showing "how to do computing" for everyday computer usages... For a general public
Monday 12 November 2012
How to format USB drive using Linux terminal ..
How to format USB with Linux terminal ..
[ Formatting a USB in Ubuntu or linux is as easy as make filesystem (mkfs).
mkfs and tab will show you all the filesystem types you can use:
[anc@localhost~]$ mkfs
mkfs mkfs.ext3 mkfs.jfs mkfs.ntfs mkfs.vfat
mkfs.cramfs mkfs.ext4 mkfs.minix mkfs.reiserfs mkfs.xfs
mkfs.ext2 mkfs.ext4dev mkfs.msdos mkfs.udffs
To format a USB drive all you need to know is its name, this can be found by
typing df at a terminal:
[anc@localhost~]$ df -hT
Filesystem Type Size Used Avail Use% Mounted on
--snip
/dev/sdc1 ext3 3.6G 3.3G 134M 97% /media/disk
In the above example my USB is sdc1 and is a 4G USB stick. As you can see
I changed it from NTFS to ext3.
FAT32 and NTFS are weak filesystems, not only are they prone to losing data but also
require constant defragging. Most linux filesystems (except ext2) are journalled. Thye never require defragging and have better security- the disadvantage is that if you format a USB memory stick as ext3 it cant be read under windows.
To answer your earlier question,
mkfs.vfat /dev/sdc1
mkfs.ntfs /dev/sdc1
would make FAT32 and NTFS filesystems on a memory stick called sdc1
Hope that helps. ]
[ This is another posting showing "how to do computing" for everyday computer usages... For a general public ]
[ Formatting a USB in Ubuntu or linux is as easy as make filesystem (mkfs).
mkfs and tab will show you all the filesystem types you can use:
[anc@localhost~]$ mkfs
mkfs mkfs.ext3 mkfs.jfs mkfs.ntfs mkfs.vfat
mkfs.cramfs mkfs.ext4 mkfs.minix mkfs.reiserfs mkfs.xfs
mkfs.ext2 mkfs.ext4dev mkfs.msdos mkfs.udffs
To format a USB drive all you need to know is its name, this can be found by
typing df at a terminal:
[anc@localhost~]$ df -hT
Filesystem Type Size Used Avail Use% Mounted on
--snip
/dev/sdc1 ext3 3.6G 3.3G 134M 97% /media/disk
In the above example my USB is sdc1 and is a 4G USB stick. As you can see
I changed it from NTFS to ext3.
FAT32 and NTFS are weak filesystems, not only are they prone to losing data but also
require constant defragging. Most linux filesystems (except ext2) are journalled. Thye never require defragging and have better security- the disadvantage is that if you format a USB memory stick as ext3 it cant be read under windows.
To answer your earlier question,
mkfs.vfat /dev/sdc1
mkfs.ntfs /dev/sdc1
would make FAT32 and NTFS filesystems on a memory stick called sdc1
Hope that helps. ]
[ This is another posting showing "how to do computing" for everyday computer usages... For a general public ]
Friday 12 October 2012
md5sum.exe introduction
After you download all the Shorten (.shn) files for a particular disc or show, you want to verify that the files are not
corrupted or otherwise unusable before you burn them to disc
or host them on your file server. We do this by checking
the downloaded Shorten (.shn) files against an .md5 file. An .md5
is a simple text file that contains a "fingerprint" of each
Shorten file.
When you perform an md5 check, you are comparing the fingerprint from the files you downloaded to the fingerprint of the
files on the server you downloaded from. If the md5's (fingerprints) match, you have an uncorrupted Shorten file.
md5sum.exe - 48KB 88170
Downloads since 9/29/00
Open an MS-DOS window and go to the directory of the show you want to check. When you are in that directory, type:
md5sum -c [filename].md5
You must insert the name of the .md5 file [without the brackets]. Below is an example of a successful md5sum check:
On the other hand, if a track does not pass the md5check, you will see the following:
If any Shorten files do not pass the .md5 check, you should delete
the offending file(s), and try re-downloading. Then run the
.md5 check again. The file(s) should now pass the .md5 check.
If the same files fail an .md5 check more than twice, you should
contact the FTP Siteop you downloaded the files from and let them
know what tracks are giving you a problem. They may be hosting a
corrupted track without knowing it.
Open an MS-DOS window and go to the directory of the show you want to create an .md5 file for. When you are in that
directory, type:
md5sum *.shn > [filename].md5
NOTE: You must insert the name of the .md5 file [without the brackets]. Example:
md5sum *.shn > ph94-06-26d1.md5
An .md5 file will be created and placed in that directory. Please remember to adhere the etree.org naming scheme when
naming .md5 files!
Please remember to always .md5 check your Shorten files before burning!
Special thanks to bruce@gridpoint.com and the PCP community for compiling this special version of md5sum. Documentation and graphics by Mike Wren.
Labels:
Command Line,
Computing,
Data recovery,
Debug,
desktop,
File systems,
hack,
Java update,
Malware,
PC,
programming,
Prompt,
Server,
solution,
Tookit,
Troubleshoot,
tutorial,
Win7,
Windows,
Xp
Sunday 7 October 2012
Code - breaking ( PHP programming ) Warming up
For some time I've developing stuff in PHP .. Like experimenting stuff
Its a very interesting language
to experiment with .. As it is the same with Java, Python, PHP, C++ and Ruby&Rails ....
Today, I felt like talking about php .. One, think there is one important think to say to anyone willing to learn and programm in PHP, for you to run and develop php on your computer, its necessary to have a server running on the machine that will be used to develop and write the php code ..
It might sound quite complicated but its very simple ...To setup a server on your own computer just download Xampp for Windows, LAMP for Linux, or MAMP for Mac OS (Apple).
After your download it and install it and run properly the server you will able to see you php files via-localhost on your browser. This post isn't about how to install your server and run the localhost .. But I can explain it on another post .. For now, lets just focus on PHP coding.
The simple and first thing on any programming language is the
"Hello World"
"
<html>
<head>
<title> Test PHP </title>
</head>
<body>
<?php
echo " Hello World ! ";
?>"
</body>
</html>
"
That's it simple ....
O Browser will see somethink like this;
to experiment with .. As it is the same with Java, Python, PHP, C++ and Ruby&Rails ....
Today, I felt like talking about php .. One, think there is one important think to say to anyone willing to learn and programm in PHP, for you to run and develop php on your computer, its necessary to have a server running on the machine that will be used to develop and write the php code ..
It might sound quite complicated but its very simple ...To setup a server on your own computer just download Xampp for Windows, LAMP for Linux, or MAMP for Mac OS (Apple).
After your download it and install it and run properly the server you will able to see you php files via-localhost on your browser. This post isn't about how to install your server and run the localhost .. But I can explain it on another post .. For now, lets just focus on PHP coding.
The simple and first thing on any programming language is the
"Hello World"
"
<html>
<head>
<title> Test PHP </title>
</head>
<body>
<?php
echo " Hello World ! ";
?>"
</body>
</html>
"
That's it simple ....
O Browser will see somethink like this;
Saturday 15 September 2012
Subscribe to:
Posts (Atom)
How to Create a Ansible Lab on your Local Machine using Vagrant in 5 min using ChatGPT
This is an exciting experiment of mine as DevOps. As I am experimenting with the Tools available ... So, the quest is to " Vagrantfile ...
-
How To Hide and unhide the hard disk Volumes using CMD Commands : First check how many drives are there in my computer and then s...
-
VMWare Workstation doesn't ship in a deb, so it isn't registered in dpkg (which is why you can't find it in the software center...
-
Issue: You go to activate Microsoft Office 2010 and you receive a message stating, “Your copy of Microsoft Office Professional Plus 2010 ca...